When a door needs a hinge that sits flush in both the frame and the door edge and still swings smoothly, a full mortise ball bearing butt from Hager Companies does the job. Both leaves are cut into the wood or metal, so the hinge shows only its knuckle barrel when the door is closed.
This one measures 4-1/2 in x 4-1/2 in with square corners, ready for square-cut mortises. Two ball bearings carry the load between the five knuckles. The steel leaves turn on a steel pin that is non-rising and removable, capped with button tips and a plug, so you can lift a door off its hinges without unscrewing anything.
The finish is bright nickel, BHMA 618 (US14), plated and clear coated for a polished silver look that pairs with other US14 hardware on the opening. Hager backs the hinge with a lifetime limited warranty and a 1 year warranty on the finish.
- Size: 4-1/2 in x 4-1/2 in
- Type: full mortise, square corners
- Bearings: two ball bearings, 5 knuckles
- Material: steel leaves, steel pin
- Pin: non-rising, removable, button tip with plug
- Finish: bright nickel, BHMA 618 (US14), clear coated
- Warranty: lifetime limited, 1 year finish
- Part number: BB127941214, UPC 041359100416
Bearing Type:
Ball Bearing
BHMA Finish:
618 (US14) Bright Nickel Plated, Clear Coated
Corner Type:
Square
Dimensions:
4-1/2" x 4-1/2"
Finish:
Bright Nickel
Finish Code:
US14
Finish Family:
Polished Silver
Hinge Tip:
Button
Hinge Type:
Full Mortise
Knuckles:
5
Manufacturer Warranty:
Limited Warranty: Lifetime, 1 Year Finish
Material:
- Steel
Pin Type:
Removable Pin
No reviews found
